TG Metals hits high notes as Burmeister drilling hits 2.37pc lithium
High-grade lithium drilling returns up to 12.35m at 1.53% Li2OSix composite samples exceed the nominal 1.2% Li2O DSO specificationPotential offtake partners are assessing samples as the mining lease application…

- High-grade lithium drilling returns up to 12.35m at 1.53% Li2O
- Six composite samples exceed the nominal 1.2% Li2O DSO specification
- Potential offtake partners are assessing samples as the mining lease application progresses
Special Report: TG Metals has reinforced its Lake Johnston project’s suitability for direct shipping ore operations after drilling at the Burmeister deposit returned grades above the nominal 1.2% Li2O DSO specification.
Standout results from the five diamond holes totalling 759.9m are:
- 12.35m at 1.53% Li2O from 197.25m and 1.95m at 2.37% Li2O from 157.7m (DSO002); and
- 5m at 1.24% Li2O from 133m (DSO004).
All six composite samples exceeded the nominal 1.2% Li2O DSO specification.
TG Metals (ASX:TG6) adds that diamond drilling has provided additional geological information for mine planning and representative spodumene-rich samples for assessment by potential offtake customers and development partners.
Drilling tested areas within and beneath Burmeister’s existing DSO-focused inferred mineral resource estimate of 6.71Mt at 1.18% Li2O, reported above a 0.4% Li2O cut-off within an optimised pit shell.
Mineralised pegmatite was also intersected down-dip of the resource, supporting the geological interpretation and providing scope for potential resource expansion through further infill drilling.
High-grade samples head for assessment
TG6 prepared six composite samples from the drill core, all of which exceeded the nominal 1.2% Li2O DSO specification without ore sorting.
Samples have been dispatched to potential offtake and financing partners to assess product quality and downstream processing requirements.
“This latest round of drilling confirms Burmeister’s position as one of Australia’s premier hard rock lithium deposits, reinforcing the opportunity for a low-capital-intensity, open-pit DSO operation,” chief executive officer David Selfe said.
“We continue to see strong interest from offtake customers and strategic development partners, with commercial discussions progressing alongside our technical work to unlock the deposit’s economic potential.”
Studies and permitting continue
Lake Johnston is 241km from Esperance, where existing export infrastructure could provide a potential route to market.
It also hosts the nearby Jaegermeister lithium deposit, while further potential exists at depth beneath Burmeister.
TG6 is progressing the Burmeister mining lease application alongside DSO studies and discussions with prospective customers.
A water exploration licence has been granted, and a first-pass exploration program is being developed.
Further shallow drilling will help define the oxidation boundary for grade control and mine design, while flora, fauna and Aboriginal heritage surveys along access routes are also planned.
Customer feedback, product assessment and permitting remain important steps as TG6 works towards a potential DSO operation.
This article was developed in collaboration with TG Metals, a Stockhead advertiser at the time of publishing.
This article does not constitute financial product advice. You should consider obtaining independent advice before making any financial decisions.
The post TG Metals hits high notes as Burmeister drilling hits 2.37pc lithium appeared first on Stockhead.
Figures reflect the source report and its stated period. This article is for information and is not investment advice.



